Manufactur standard Pvb Layer Thickness - Solar EVA film – Xiaoshi
Manufactur standard Pvb Layer Thickness - Solar EVA film – Xiaoshi Detail:
Solar EVA film
In the solar PV module production industry, the most common encapsulation material is EVA film. With the help of a lamination machine, the solar cells are laminated between the Eva solar films in a vacuum, which is under compression. Once the solar EVA sheets have been laminated, the EVA film play an important role in preventing humidity to ensure the Solar Panel efficiency . High quality solar EVA film will definitely prolong the life span of solar panel.
EVA solar film play an important part in enhancing the durability and performance of solar panels. They enable the solar cells to ‘float’ between the glass and the backsheet, helping to soften shocks and vibrations and protecting the cells and their circuits. High-performance EVA sheets we supply are subject to rigorous quality testing and verification. Featuring products in a wide range of sizes and types, our portfolio of EVA films is a trusted source for many of the world’s largest photovoltaic module manufacturers.
Product description and advantages
• Excellent durability & Weather resistance
• High-temperature& humidity resistance
• UV light resistance
• Excellent adhesion to glass & PET,ETFE,TPT
• Excellent light transmittance and transparency
• High cross-linking rate after lamination
Storage condition and life time
- 1.T≤30°C,H≤70%
- 2.Shift time is 8-12 months
- 3.All open carton EVA film must be used up within 24hours and avoid it absorb some dust and water
Technical Data
| Product | Solar EVA flm | ||
| Performance | Unit | High Transparent | |
| Tensile Strength | mpa | >15 | |
| Elongation at Break | % | 500 | |
| Peel Strength with Glass | N/cm | >80 | |
| (140℃ 15mins curing) | |||
| Peel Strength with Backsheet | N/cm | >60 | |
| (140℃ 15mins curing) | |||
| Transmittance | 280-380nm | % | ≥80 |
| （after curing） | 238-800nm | % | ≥91 |
| Volume Resistance | Ω·cm | ≥1×1015 | |
| Shrinkage Rate | % | MD＜3 | |
| (120℃, 5mins before curing) | TD＜1.5 | ||
| Complete Cross-linking Degree | % | >75 | |
| (140℃, 15mins) | |||
| UV/Aging Resistance | △YI | ＜5 | |
| (UV, 1000hrs) | |||
| Wet Heat Ageing | △YI | ＜5 | |
| (+85℃，85% humidity，1000hrs) | |||
Product specification
| Thickness : | 0.35mm~0.6mm (tolerance: -0.03~+0.1mm) |
| Maximum width: | 1600mm |
| Roll length: | 100m/200m or customized. |
Product detail pictures:
Related Product Guide:
To constantly improve the management system by virtue of the rule of sincerely, good faith and quality are the base of enterprise development, we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Manufactur standard Pvb Layer Thickness - Solar EVA film – Xiaoshi , The product will supply to all over the world, such as: Stuttgart, Romania, Honduras, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Prudence from Greece - 2017.07.28 15:46
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Jane from Czech - 2017.01.28 19:59
