page_banner

products

OEM manufacturer Laminated Glass Interlayer Types - White EVA film – Xiaoshi

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Reusable Silicone Vacuum Bags, Pvb Interlayer, Glass polishing tool, We encourage you to make get hold of as we've been wanting for companions inside our venture. We are sure you'll uncover doing company with us not only fruitful but also profitable. We've been prepared to provide you with what you require.
OEM manufacturer Laminated Glass Interlayer Types - White EVA film – Xiaoshi Detail:

Laminated glass EVA film is placed between two layers of glass, a continuous vacuum is requested to pump out air when heated up to soften the film and laminate 2 pcs of glass into safety glass.
There are different types of white EVA film for safety glass lamination.
White opaque, Super white, Frosted white, Milky white and Jade white.

White color EVA film can be used for both indoor and outdoor glass lamination and also insert materials lamination. It has lower lamination temperature which are suitable for match with different types of inserts( Fabric, PET film, PVC film and other types of inserts).

Product description and advantages

Due to the good characters of EVA film in adhesion, durability,moisture resistance, it was more and more widely used in current components and a variety of optical products. such as partition wall and shower room.

The most important properties of the film include:

High durability

Protection against impact

Humidity resistance

Good adhesion to glass & variety kinds of inserts

Low water absorption rate

Storage condition:

It is usually stored in a ventilated, dry and clean warehouse, avoiding direct sunlight and radiation of heat, preventing moisture and heavy pressure. The temperature of the warehouse should ≤ 35℃, and the humidity ≤55%. It should not be placed directly on the ground, supported by wooden boards or other things to facilitate ventilation, heat dissipation and moisture isolation. If the film is pressurized, heated, and exposed to excessive moisture, it will cause different degrees of self-adhesion. If the surface humidity of the film is too high, it will also affect the bonding strength of the film and glass and other glass interlayer materials, affecting normal use. The film should be used as soon as possible after opening. If it is not applicable temporarily, the film should be sealed and packaged.

Smart PDLC film, Your glass is under smart control1
Product Specifications

Product Specifications ( Thickness)
High Clear EVA film 0.25mm, 0.38mm Max 2400mm
Ultra Clear EVA film 0.25mm, 0.38mm, 0.50mm, 0.76mm, 1.52mm Max 2600mm
White EVA film 0.38mm * 2000mm/2400mm *100m
Color EVA film 0.38mm * 2000mm/2400mm *100m

 Technical Data

Product TW-2 TW-1 TR-2 TR-1 OP-1 OP-2
Transmittance % 46 28 12 5 0.8 0.3
Shodow Block % 53 78 86 92 96 98

Product detail pictures:

OEM manufacturer Laminated Glass Interlayer Types - White EVA film – Xiaoshi detail pictures

OEM manufacturer Laminated Glass Interlayer Types - White EVA film – Xiaoshi detail pictures

OEM manufacturer Laminated Glass Interlayer Types - White EVA film – Xiaoshi detail pictures

OEM manufacturer Laminated Glass Interlayer Types - White EVA film – Xiaoshi detail pictures

OEM manufacturer Laminated Glass Interlayer Types - White EVA film – Xiaoshi detail pictures


Related Product Guide:

Our corporation insists all along the quality policy of product top quality is base of organization survival; purchaser pleasure will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff plus the consistent purpose of reputation very first, purchaser first for OEM manufacturer Laminated Glass Interlayer Types - White EVA film – Xiaoshi , The product will supply to all over the world, such as: Ghana, Greece, Pretoria, With the growing of the company, now our products sold and served at more than 15 countries around the world,such as Europe,North America,Middle-east,South America,Southern Asia and so on. As we bear in our mind that innovation is essential to our growth, new product development is constantly.Besides, Our flexible and efficient operation strategies,High quality products and competitive prices are exactly what our customers are looking for. Also a considerable service brings us good credit reputation.
  • We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
    5 Stars By Deirdre from Mauritius - 2018.12.11 14:13
    The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
    5 Stars By ron gravatt from Anguilla - 2018.05.22 12:13
    Write your message here and send it to us