-
Sealing Sealant
The Butyl sealant is a one part polyisobutylene PIB-based material, totally solvent-free especially formulated for use as the primary seal in double sealed units. PIB allows for minimum water vapour and gas permeation.
-
Molecular sieve
Insulating glass 3A molecular sieve can absorb water, ammonia and other impurities between two layers of glass sheets to down the dew point to keep clean and clear even under very low temperature. It can also decrease the pressure difference which caused by the huge difference of temperature in day and night.
-
Solar Backsheet
TPT (solar backsheet) symplectite coatings contain highly dispersed nano titanium silicide and high thermal conductivity materials, which greatly improve the High-FluoroCocrystal solar cell backsheet performance.
-
ETFE Film
ETFE is a unique thermoplastic Fluoropolymers. It combines improved mechanical properties, great Mouldability, and excellent electrical properties and chemical resistance.
-
Liquid Peelable Film
Liquid peelable film-water-based peelable coating, also known as temporary protective coating, is a kind of temporary protective coating with certain mechanical strength, acid and alkali resistance and stickiness formed on the surface of the work piece after drying and self-drying. protective film. Can be applied to metal, glass, stone, wood, ceramic, Paint, plastic and other surfaces, naturally dry to form a film. The membrane body has anti-scratch, anti-wear, anti-dust and cleaning protection. The membrane body has good solvent resistance, grease resistance, water resistance, and long-term high temperature exposure resistance. The film body has the characteristics of no stickiness in summer, no brittleness in winter, and no residue after release. Especially suitable for long-term weather protection in both indoor and outdoor.
-
Metal Mesh
Metal mesh was used for laminate safety wired glass or Wire mesh glass, is composed of glass and metal mesh materials. Metal meshes from finely woven gauze to thickly braided weaves and decoratively etched metal foils, offers an innovative range of structural design possibilities. These materials allow the transparency, rigidity and structural qualities when laminated in-between two or more layers of glass. This will give decorative and aesthetic qualities of the metal weaves and meshes.
-
Light Transmittance Meter
UV transmittance meter, infrared transmittance meter, visible light transmittance meter (light transmittance meter). Three functions in one device. We just need to put the measured sample into the test slot and the three test results will be displayed on the interface immediately at the same time. The spectrum transmission meter has large LCD display, three different display interfaces can be switched.
-
Thermometer
Thermocouple is one of the most commonly used industrial elements in temperature measuring which is formed when 2 dissimilar metals are joined as a circuit with thermo current generated from the temperature difference between the metals.If there is any temperature difference between the thermocouple tip and reference end of the thermocouple, the instrument will display the temperature value versus the thermo emf generated from the thermocouple. On-site measurement and long distance transmission can both be carried out. -
Tin side detector
Also called Float glass surface identification device, it is used to identify the tin surface and the side of float glass.Instrument and indicator with original writing and miscellaneous light filtering technology, recognition effect is obvious.Use long life lamp, replacement bulbs, are generally not required by the internal rechargeable lithium
-
Silicon rubber sheet
Silicone rubber sheet is a new macro-molecular material that has been made by virgin silicone. With the characteristics of high tensile strength, good heat resistant, corrosion resistant, anti-aging, oil resistant, non toxic etc.
